Smeg WM61121 manual Failure Possible cause Remedy

Models: WM61121

1 26
Download 26 pages 52.42 Kb
Page 22
Image 22

187352

Failure

Possible cause

Remedy

The machine does not

Machine is not powered.

Check if:

work (symbols are not

 

• power in the socket,

illuminated).

 

• the fuse is OK,

 

 

• plug is in the socket.

Washing program

Door is not properly closed.

Push it towards the machine.

does not start (ON/

 

 

OFF LED is flashing).

 

 

Water does not enter the

Disturbed water inlet.

Check if:

machine (after approx. 8

 

the water faucet is open,

min the machine reports

 

inlet pipe net filter is clean.

failure -3 flashes).

 

Push the START/PAUSE button.

Water is leaking from

Filter is not tightly screwed in.

Tighten the filter properly.

the machine.

Inlet pipe is not tightly screwed to

Tighten the inlet pipe.

 

the machine or to the water faucet.

 

 

Outlet pipe fell to the floor.

Affix the outlet pipe to the drain.

The machine moves

The machine is not properly

Level the machine with the adjustable

during operation.

leveled.

legs.

 

Transport brackets are not

Remove transport brackets.

 

removed.

 

The machine vibrates

Unevenly distributed laundry,

This is normal, the machine will

during the spin.

especially with very small

reduce the RPM if vibrations are too

 

quantities (for ex. only the

strong.

 

bathrobe).

Wash larger quantity of laundry.

Excessive foaming

Excessive measure of detergent.

Use washing powder according to

during washing.

 

the instructions by the producer and

 

 

according to the water hardness and

 

 

soiled laundry. Use only detergents

 

 

for machine washing.

Water is poorly

Water outlet is clogged.

Check if:

pumped out or not at

 

the filter is clean,

all (machine reports

 

outlet pipe is not jammed,

failure - seven flashes

 

outlet pipe is positioned higher than

of LED).

 

1m.

 

 

Push START/PAUSE again.

Laundry is not

The machine switched on the

The machine operates normally.

properly spun.

UKS function. Because of bad

Wash large and small pieces of

No failure is reported.

laundry balance, the machine

laundry together.

 

has automatically reduced spin

 

 

RPM.

 

 

 

 

Greasy wads appear

Too little detergent (laundry was

Wash the laundry again.

on the laundry.

very greasy).

Add more detergent for such soiled

 

 

laundry, or use liquid detergent.

22

Page 22
Image 22
Smeg WM61121 manual Failure Possible cause Remedy