spin) to empty the water and terminate the program.
Pause button
By pressing the START/PAUSE button (C) program may be suspended at any time. After certain time you may open the door if there is no water in the drum, otherwise this is not possible. Program is continued by pressing the START/PAUSE button (C).
•
•
Failures
Program is suspended in case a failure occurs. Signal LED’s are flashing (see cf. Troubleshooting).
Power failure
At electric cutout the program is interrupted, however, after the power supply has been re- established, the program operation automatically proceeds.
If a power failure occurs when the drum is still full of water, be careful not to open the door before you pump the water out.
187352
15
