Smooth Fitness 7.1HR user manual Speed, Incline, P2 Time SET UP

24

SMOOTH 7.1HR POWER FOLDING TREADMILL

COMPUTER OPERATION

SPEED:

This shows the starting speed for the first minute. 8 dots per line for the speed profile and 10 lines for each 10-minute speed profile. Each dot is equal to 1.2m ph so, from 0.5-1.2mph speed one dot is displayed. Then at 1.3mph the second dot appears.

Each line blinks following the time. One minute per line. When the time reaches 11 minutes and above the whole matrix moves to the left one line at a time to show the 11th line and so on.

INCLINE:

The LCD does not display incline information until it needs to be changed. During the exercise, press the INCLINE UP and DOWN button. LCD 2 will show on the top left corner and show the incline % as shown below. After releasing the incline button, LCD 2 shows the incline level for 4 seconds and then returns to the SPEED status.

P2: TIME SET UP

Under the SELECTING MODE, press INCLINE DOWN to select P2 (Time Set Up mode) then press ENTER. LCD 1 will show P2 and the time will be blinking 0:00. LCD 2 will show a 24-dot timer.

Visit us at: www.smoothfitness.com