40
735i TREADMILL
TROUBLESHOOTING
SYMPTOM | CAUSE | SOLUTION | |
|
|
| |
| A). Not plugged in. | Please check power input and fuse. | |
| Contact your dealer if unit is plugged in, | ||
No power to display | B). Power switch not activated | ||
powered on and circuit breaker is | |||
| C). Power input circuit breaker blown. | ||
| depressed. | ||
|
| ||
|
|
| |
LCD display abnormal | LCD damaged | Contact your dealer for troubleshooting | |
|
|
| |
|
| Switch off the power and switch on after 10 | |
|
| seconds then press START. Check: | |
|
| 1. Does the running belt move? | |
| A).speed feed back problem. | 2. If the running belt moves, does error | |
SPEED ERROR | message appear after 10 seconds? | ||
B).Motor console damaged. | If the belt moves and message does not | ||
| |||
|
| appear after powering off, lubricate the | |
|
| running belt and deck. If the melt moved | |
|
| and message appears, please contact your | |
|
| dealer. | |
|
|
| |
|
| You can keep going to use except adjust | |
Show E7 | Incline motor malfunction. | the grade. | |
Contact your agent to determine and get | |||
|
| ||
|
| solutions. |
