Smooth Fitness SB4 Install Seat Back, Install Seat Frame Adjust Knob, Install Handlebar Post

- 13 -

SB4 Recumbent Bike

ASSEMBLY INSTRUCTIONS

Step 9 – Install Seat Back

Attach the Mesh Seat Back ( 18 ) to the Back Support Tube (16) using:

4 – M5 x 20MM Screws ( 144 )

Step 10 – Install Seat Frame Adjust Knob

Attach the Seat Frame Adjust Knob (20) to the Gas

Strut (71).

Step 11 - Install Pedals and Pedal Straps

Thread Right Pedal (9R) with an “R” onto the Right

Crank Arm (10) in a clockwise direction.

Thread Left Pedal (9L) with an “L” onto the Left Crank

Arm (10) in a counter–clockwise direction.

Step 12 - Install Handlebar Post

Connect the Upper Computer Wire ( 90 ) to the Lower Computer Wire ( 91 ) and

the Upper Hand Pulse Wire ( 92 ) to the Middle Hand Pulse Wire ( 91 ).

Attach Handlebar Post ( 2 ) to the Main Frame (1) using:

4 – M8 Washer ( 157 )

4 – M8 Spring Washers ( 118 )

4 – M8 x 15MM Round Allen Head Bolt ( 120 )

Note: Be careful not to damage or pinch wires when

Handlebar Post is installed

www.smoothfitness.co.uk