Manuals / AMX / Home Audio / Stereo System

AMX DAS-T0804-SIG manual Installing a Second DAS-AMFM Tuner Module, Rear Panel Tuner Slots 1

Models: DAS-T0808-SIG DAS-T0804-SIG

1 102
Download 102 pages 63.65 Kb
Page 56
Image 56

Tuner Modules

Installing a Second DAS-AMFM Tuner Module

The following steps describe installing a second DAS-AMFM tuner module into Slot 1 (in addition to the DAS-AMFM module that comes pre-installed in Slot 2). In these instructions, the second tuner is referred to as “Tuner 2”.

1.Remove the cover from the controller.

2.With the back of the unit facing you, remove the screws from the Tuner Option cover plate at the right top corner of the rear panel (FIG. 65) and remove the plate. Retain the screws, as they will be used to install the tuner module.

Slot 1

(Tuner Option cover plate installed)

Slot 2

(DAS-AMFM module pre-installed)

FIG. 65 Rear Panel - Tuner Slots 1 and 2

3.Carefully insert the second DAS-AMFM tuner module into Slot 1, with the electronics facing up, and use the screws that attached the Tuner Option cover plate to secure the tuner to the controller.

Be careful not to damage the ribbon cable on the top of the Tuner module.

4.Place the Rear Panel connector at the end of the ribbon cable (FIG. 66) on the rear board pin-bus, keeping the red stripe at the top.

RED STRIPE (to Pin 1)

not used

 

 

Slot 2

 

Slot 1 (see Note below)

 

Rear Panel

 

 

FIG. 66 Tuner Ribbon Cable

5.Connect the "Slot 1" connector on the ribbon cable to the Tuner 2 module (FIG. 67).

The ribbon cable must be oriented so that the red stripe is connected to Pin 1 on the connector.

Rear of controller

20-pin connector on Tuner 2

FIG. 67 Tuner 2 Module Connection

Verify that both ends of the cable are securely plugged into their respective boards through the 20-pin connectors (FIG. 68).

44

Tango / Mi-Series Audio Controllers

Page 55 Page 57
Page 56
Image 56
AMX DAS-T0804-SIG, DAS-T0808-SIG manual Installing a Second DAS-AMFM Tuner Module, Rear Panel Tuner Slots 1
Page 55 Page 57

DAS-T0808-SIG, DAS-T0804-SIG specifications

The AMX DAS-T0804-SIG and DAS-T0808-SIG are the forefront of advanced data distribution systems, designed to cater to the dynamic needs of commercial audio-visual installations. These models provide exceptional performance in managing and distributing various signals efficiently, ensuring seamless integration with a wide array of multimedia components.

One of the standout features of the DAS-T0804-SIG is its ability to support up to four output signals, while the DAS-T0808-SIG extends this capability to eight outputs. This scalability makes both units ideal for projects requiring flexible signal routing, whether for corporate environments, educational institutions, or entertainment venues.

Both models leverage cutting-edge digital signal processing (DSP) technologies to enhance audio quality and ensure fidelity during signal transmission. The units are equipped with advanced signal management features, including automatic gain control and equalization, which help maintain consistent audio levels and optimize playback across different environments. This ensures that users experience high-quality sound without the hassle of manual adjustments.

Connectivity options are plentiful, with support for both HDMI and analog inputs. The HDMI ports allow for seamless integration with high-definition video sources, while the analog inputs cater to older equipment, making the DAS-T0804-SIG and DAS-T0808-SIG versatile choices for mixed-system setups. The ability to handle diverse input types helps manage the challenges of modern AV environments, where devices can vary widely.

Another notable characteristic is the intuitive user interface that facilitates easy configuration and operation. The models come equipped with LED indicators for monitoring signal status, which provide real-time feedback and help troubleshoot issues swiftly. This user-centric design is particularly beneficial for installation professionals who require efficient workflows.

The DAS-T0804-SIG and DAS-T0808-SIG are also built with robust security features to protect against unauthorized access and ensure integrity in signal transmission. This is increasingly crucial in settings where sensitive information may be communicated.

In summary, the AMX DAS-T0804-SIG and DAS-T0808-SIG systems are powerful, flexible, and secure solutions for modern AV installations, characterized by their advanced signal processing, versatile connectivity, and intuitive design. Their ability to accommodate a variety of applications makes them an essential tool for any professional seeking to optimize audio-visual performance.