AMX DAS-T0808-SIG, DAS-T0804-SIG Learn IR Commands, IR OK 50 percent sure 1 command received

Setup and Configuration

If the Source Type has not been previously selected, “Select Source Type” is displayed.

[Quit] returns to the previous screen.

Click “Next Type” to scroll through the following available Source Types: Select Source Type

TUNER (Tuner) CD (CD) DVD (DVD) SAT (Satellite)

AUDIO (Audio Server) OTHER (Other) XM (Custom XM)

3.Select the “Source Type” by clicking “Learn IR” for the particular Source being programmed.

Learn IR Commands

Refer to the IR Commands By Source Type section on page 57 for details.

1.Select Learn IR on the Select Source # Type screen (FIG. 27) to access the Learn IR screen (FIG. 28), with the first IR to be learned for the selected Source Type:

Status of IR

Returns to the Select Source # Type scree

Clears the current IR code

Next IR code

Previous IR code

FIG. 28 Learn IR Commands

2.Hold the remote approx. 6" - 12” away from the Controller.

3.Point the remote at the IR window.

4.Press and hold the button for 2 seconds on the remote that corresponds to the IR function displayed.

“Clear” is used to clear an IR that has been previously learned. Only learn the IR codes that apply to the particular Source Remote.

If the IR displayed is not used by the Source Remote, select Next to move to the next IR to be learned

5.The Programming screen will display one of the following messages, indicating the accuracy of the IR code received (FIG. 29):

IR not taught – Error Code # (command was not received, was incomplete or could not be learned)

IR OK – 99 percent sure (More than 2 commands were received) IR OK – 75 percent sure (2 commands were received)

IR OK – 50 percent sure (1 command received)

Tango Series Audio Controllers 29