AMX DAS-T0808-SIG, DAS-T0804-SIG manual Adjusting Output Gain, Input Attenuation Mode screen

Setup and Configuration

FIG. 31 Input Attenuation Mode screen

3.Select a source (1-8) to be adjusted for input attenuation. This selection invokes the Set Input Attenuation For Source # screen (FIG. 32):

FIG. 32 Set Input Attenuation for Source # screen

4.Select Increase and Decrease to adjust the input attenuation for the selected device.

Increasing attenuation will have the effect of dropping the sound level, while decreasing the attenuation will raise the sound level.

Input Attenuation can be adjusted in increments of 3dB as follows: 0, -3, -6, -9, -12.

5.Select Exit to adjust the input attenuation for another source:

Adjusting Output Gain

1.From the MRC Gain/Attenuation Mode screen, select “Output Gain” (FIG. 33):

FIG. 33 MRC Gain/Attenuation Mode - Output Gain

2.The Output Gain Mode screen is displayed. Select the source to be adjusted for “Output Gain” (FIG. 34).

FIG. 34 Output Gain Mode - Exit

3.The following screen is displayed (FIG. 35):

FIG. 35 Set Output Gain for Source # 3

Tango Series Audio Controllers 31