AMX DAS-T0804-SIG, DAS-T0808-SIG manual Status Messages

Serial Control Strings

Status Messages

Status Messages

ERR	Error
ACK	Acknowledge Status
PON	Power On Status
	Note: Not used
POFF	Power Off Status
	Note: Not used
MVERx	Firmware Version Status, where ‘x’ is the current firmware version (4 digits)
MCFr,s,z,c	Configuration Status, where:
	1)	'r' is the number of rooms connected, (2-64)
	2)	's' is the number of sources connected, (4,6, or 8)
	3)	'z' is the number of groups available, (r/2)
	4)	'c' is the clock available status, (0-1) where:
		0: no clock installed
		1: clock module is present
FNICxx	Num IIC Devices Status, where ‘xx’ denotes the number of IIC devices available in the
	MRC
FSICx,a,v,p,d	IIC Device Status, where:
	1) ‘x’ is the IIC device index, valid values range from 1 to the number of IIC devices as
		denoted in the ‘Num IIC Devices Status’
	2)	‘a’ is the device ID (3 digits)
	3)	’v’ is the version (4 digits)
	4)	‘p’ is the product ID (4 digits)
	5)	‘d’ is a descriptive string for the device, the string is of variable length
AMXB	AMX Beacon Response, where
<-UUID=v>	1) 'v' = 'MATRIX-CTRL'
<-SDKClass=w>	2)	'w' is 'DCTRL'
<-Make=x>
	3)	'x' is 'AMX'
<-Model=y>
	4) 'y' is 'MI-4', 'MI-6', OR 'MI-8' depending on controller hardware
<-Revision=z>
	5)	'z' denotes the current firmware version
	(Note: v7.02 or higher only)
BAUD:x	Baud Rate Status, where,
	‘x’ is the current Baud Rate (4 digits)
	(Note: v7 or higher only)
MVLr,v	Volume Status, where:
	1)	'r' denotes the room, (1-64)
	2)	'v' denotes the volume setting, (0-70, 101)
		101: Mute
		0..70: 0..-70 dB
MBSr,b	Bass Status, where:
	1)	'r' denotes the room, (1-64)
	2)	'b' denotes the bass level, (0-20)
		0: level
		1..10: -10..-1 dB
		11..20: 1..10 dB
MTRr,t	Treble Status, where:
	1)	'r' denotes the room, (1-64)
	2)	't' denotes the bass level, (0-20)
		0: level
		1..10: -10..-1 dB
		11..20: 1..10 dB

80 Mi Series and Tango Audio Controllers