- 12 -
SB4 Recumbent Bike
ASSEMBLY INSTRUCTIONS
Step 5 - Install Right Seat Frame Cover
Attach Right Seat Frame Cover ( 22 ) to the Seat Carriage Frame (56) using:
2 – M5 x 25MM Screws ( 132 )
Step 6 - Install Right Seat Frame Cover
Place Seat Handlebar (3) on top of Seat Carriage Frame (56).
Connect the Lower Hand Pulse Wire (94) to the Middle Hand Pulse wire (93).
Then attach Seat Handlebar (3 ) onto Seat Carriage Frame (56) using:
4 – M8 x 15MM Allen Screws ( 120 )
4 – M8 Spring Washers ( 118)
4 – M8 Washers ( 157 )
Step 7 – Install Back Support Tube
Attach the Back Support Tube ( 16 ) to the Seat Carriage Frame (56) using:
3 – M6 Washers ( 154 )
3 – M6 Spring Washers (116)
3 – M6 x 15MM Screws (9)
Step 8 – Install Seat Back Pivot Cover
Attach the Seat Back Pivot cover ( 17 ) to the Seat Carriage Frame (56) using:
4 – M6 x 12MM Round Allen Head Bolt ( 127 )
www.smoothfitness.co.uk
