Snapper NXT22875E Maintenance Reminder, Spark Plug, Total Hours, Trip Hours, Air Filter, Clock

Operation

Maintenance Reminder		Spark Plug
The maintenance reminder (A, Figure 12) provides timely		The ‘Spark Plug’ icon (E) will appear every 50 hours (total
		hours) of operation. This indicates it is time to change the
reminders of important maintenance items. It has six
		spark plug. Be sure to follow the procedures outlined in this
display modes:
		manual.
Total Hours		To reset:
			1. Press the ‘Mode’ button until the ‘Spark Plug’ screen
Displays total hours mower has been operated. This is the
			is displayed. (The icon will flash.)
default screen.
			2. Press and hold the ‘Reset’ button for more than 3
Trip Hours			seconds.
To display:		NOTE: If not reset, the ‘Spark Plug’ icon will automatically
Press the ‘Mode’ button (B) until the ‘Trip Hours’ screen
		disappear after 3 operating hours.
is displayed.
To reset:		Air Filter
Press and hold the ‘Reset’ button (C) for more than 3
		The ‘Air Filter’ icon (F) will appear every 50 hours (total
seconds.
		hours) of operation. This indicates it is time to change the
Clock		air filter. Be sure to follow the procedures outlined in this
		manual.
is displayed. (The icon will flash.) Reproduction
To display:		To eset:
Press the ‘Mode’ button until the ‘Clock’ screen is			1. P ess the ‘Mode’ button u til the ‘Air Filter’ screen is
displayed.			displayed. (The	will flash.)
To set:			2. Press and h ld the ‘Reset’ button for more than 3
1. Press and hold the ‘Mode’ button for more than 3			seconds.
seconds. The hour display will flash.
2. Press the ‘Reset’ button to set the correct h	ur.	NOTE: If not reset, the ‘Air Filter’ icon will automatically
3. Press the ‘Mode’ button. The minutes display will		disappear after 3 operating hours.
flash.
4. Press the ‘Reset’ button to set the correct minutes.
5. Press and hold the ‘Mode’ button for more than 3
seconds to save the set time.			Change oil	Spark plug		Air filter
Change Oil			D		E	F
The ‘Change Oil’ icon (D) will appear after the first 5 hours
(total hours) of operation, then after every 25 hours of oper-			A
ation thereafter. This indicates it is time to change the oil. Be
sure to follow the procedures outlined in this manual.
To reset:
1. Press the ‘Mode’ button until the ‘Change Oil’ screen
2. Press and hold the ‘Reset’ button for more than 3			C
seconds.
			B

NOTE: If not reset, the ‘Change Oil’ icon will automatically disappear after 3 operating hours.

Figure 12: Maintenance reminder

14 www.snapper.com