Snapper NXT22875EFCA, 7800696, 7800580 Maintenance Chart, Emissions Control, Mower, Engine

Maintenance

Maintenance Chart

! WARNING !

DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Remove the starter insert. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all com- ponents to cool. Wear heavy leather gloves when handling or working around cutting blades. Blades are extremely sharp and can cause severe injury.

Emissions Control

Maintenance, replacement, or repair of the emissions control devices and systems may be performed by any non-road engine repair establishment or individual. However, to obtain “no charge” emissions control service, the work must be performed by a factory authorized dealer. See the Emissions Warranty.

MOWER		ENGINE
Every 8 Hours or Daily		First 5 Hours
Check safety interlock system		Change engine oil
Clean debris off mower		Every 8 Hours or Daily
Every 25 Hours or Annually *		Check engine oil level
	Reproduction
Check mower for loose hardware		Eve y 25 Hours or A ually *
See Dealer Annually to		Clean engine air filter a d pre-cleaner (if equipped) **
Lubricate mower		Every 50 Hours r Annually *
Check mower blade **		Change eng ne o l
Check mower blade stopping time		Repla oil filter (if equipped)
Check drive belt		Ann ally
Clean battery and cables		Replace air filter
* Whichever comes first		Replace pre-cleaner (if equipped)
		See Dealer Annually to
**Check blade more often in regions with sandy soils or
high dust conditions.		Inspect muffler and spark arrester (if equipped)
		Replace spark plug
		Replace fuel filter (if equipped)
		Clean engine air cooling system
		* Whichever comes first
		**Clean more often in dusty conditions or when airborne
		debris is present.

15