Section 4 - ADJUSTMENT & REPAIR

WARNING

DO NOT attempt any adjustments, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remove key. Remove spark plug wire from spark plug and secure wire away from spark plug. Engine and components can be extremely

hot. Avoid burns by allowing engine and components sufficient time to cool.

38" DECK

FRONT LIFT

4.2.8.38" DECK LEVEL ADJUSTMENT (SIDE TO SIDE)

NOTE: Before adjusting deck, bring tire pressure to proper P.S.I.; front 12 P.S.I., rear 12 P.S.I..

ROD

\

HAIR PIN

1.Move tractor to a firm, level surface.

2.Turn engine "OFF". Remove key.

3.Place a 2-1/2" tall block under the front of the deck

centered between the front lift arms. See Figure 4.13.

FRONT OF TRACTOR

2-1/2" TALL BLOCK

CHECK

\

\

1-3/4"TALL

BLOCK

FIGURE 4.13

4.Place a 1-3/4" tall block under the rear of the deck in

the center. See Figure 4.13.

5.Position blades as shown and lower deck onto

blocks. See Figure 4.13.

6.Disconnect the front lift rod and the rear hanger plates. See Figure 4.14.

7.Put the lift lever in the 3rd position from low cut.

8.Measure the distance from each blade tip to the floor. The measurements should be within 1/8" of each

other. (Factory setting)

FIGURE 4.14

9.If the difference is less than 1/8", go to next section, Front to rear level. If the difference is more than 1/8", adjust as described in the following steps.

10.Loosen the front adjuster nut until adjuster moves freely. Then tighten the nut until the adjuster moves only when moderate force is applied to one side of the deck. See Figure 4.15.

FRONT OF TRACTOR

• ADJUSTER NUT

FIGURE 4.15

11.Adjust the side to side level of the blade tips by moving one side of the deck up or down as needed to obtain 1/8" or less side to side deck level.

12.After leveling deck, retighten the adjuster nut using 30 to 40 ft. Ibs.

13.Attach the rear hanger plates to the hole that most closely aligns with the pin on the deck lift bracket. Secure with washer and hair pin.

14.Adjust the swivel on the front lift rod until it lines up with the hole in the front lift bracket. (Make sure the lift rod is at the top of the slot in the deck bracket) Secure with hair pin.

21

Page 108 Page 110
Page 109
Image 109
Snapper L T145H33GBV, L T150H38GKV, L T145H38GBV important safety instructions Front of Tractor
Page 108 Page 110

L T150H38GKV, L T145H38GBV, L T145H33GBV specifications

The Snapper L T145H33GBV, L T145H38GBV, and L T150H38GKV are innovative lawn mowers designed to tackle various lawn care tasks with efficiency and ease. These models blend technology and ergonomics to deliver superior cutting performance, making them a popular choice among both homeowners and professional landscapers.

One of the standout features of the Snapper L series is its robust engine options, providing reliable power for efficient mowing. The L T145H33GBV model is equipped with a 14.5 HP Briggs & Stratton engine, ensuring a strong and consistent performance even in challenging terrains. Similarly, the L T145H38GBV and L T150H38GKV models come with enhanced engine capabilities, offering higher horsepower ratings for tackling larger lawns and tougher grass types.

The cutting deck design is another hallmark of the Snapper L series. The 33-inch cutting deck on the L T145H33GBV allows for tight maneuverability, making it ideal for smaller yards or areas with obstacles. The L T145H38GBV and L T150H38GKV feature wider decks, up to 38 inches, allowing for quicker mowing of expansive lawns. These decks are designed for precision cutting, providing a clean finish while reducing the need for multiple passes.

Ease of use is a priority with these models. The Snapper L series incorporates user-friendly controls that allow for smooth operation, including an adjustable seat for comfort during longer mowing sessions. The zero-turn capability of the L T150H38GKV model allows for agile movements, enabling effortless navigation around flower beds and trees.

Durability is another key characteristic. Constructed with high-quality materials, these mowers are built to withstand rigorous use. The stainless-steel frames and heavy-duty wheels ensure stability and longevity, making them a worthwhile investment for lawn care enthusiasts.

Moreover, Snapper mowers feature advanced technologies such as electric start systems for quick and easy initiation of the engine. The inclusion of mulching capabilities transforms clippings into nutrient-rich mulch, promoting a healthier lawn while reducing waste.

In summary, the Snapper L T145H33GBV, L T145H38GBV, and L T150H38GKV lawn mowers offer a perfect combination of power, cutting precision, and usability. With advanced engine technology, durable construction, and innovative features, these mowers stand out in the crowded landscaping market, making them a reliable choice for achieving a well-maintained lawn.
Top Page Image Contents