![](/images/new-backgrounds/1111829/111829193x1.webp)
Section 2 - OPERATING INSTRUCTIONS
2.4 STOPPING |
| 2.4.5. | RELEASING | PARK BRAKE | ||
2.4.3. STOPPING MOWER | BLADE | 1. Fully depress | clutch/brake | pedal. Move park brake | ||
1. Stop mower blade by moving blade engagement | lever | "DOWN" | to | release | park brake. Release | |
lever down to the "OFF" position. See Figure 2.11. | clutch/brake pedal. See Figure 2.13. | |||||
|
|
|
|
|
| PARK BRAKE |
|
|
| CLUTCH/BRAKE | LEVER | ||
| BLADE |
|
| |||
|
|
|
|
|
| |
j | LEVER |
|
|
|
|
|
!OFF
FIGURE 2.11
WARNING
Once blade is disengaged, it should come to a complete stop in 5 seconds or less. If the blade continues to rotate after 5 seconds, the blade brake must be adjusted. Refer to Section "BLADE BRAKE ADJUSTMENT" for adjustment procedures or return machine to dealer for adjustment. DO NOT CONTINUE to operate mower until blade brake is properly adjusted.
2.4.4.SETTING PARK BRAKE
1.Fully depress clutch/brake pedal.
2.Move park brake lever up into slot. See Figure 2.12.
PUSH PEDAL ALL | PARK BRAKE |
| LEVER |
MOVE PARK BRAKE
LEVER "UP" TO
ENGAGE PARK BRAKE
FIGURE 2.13
2.5.CUTTING HEIGHT ADJUSTMENT
1.Depress lock button on cutting height adjustment lever. See Figure 2.14.
DEPRESS
LOCK BUTTON m
CUTTING
HEIGHT
ADJUSTMENT
LEVER
LOWEST CUT
FIGURE 2.14
2.Raise or lower deck to any of six positions as desired. Release lock button.
FIGURE 2.12 | DO NOT park machine on slopes. |