Section 4 - ADJUSTMENT & REPAIR

4.5BATTERY

4.5.1. BATTERY REMOVAL

1.Raise operator's seat.

2.Remove the two adjusting knobs.

3.Remove seat assembly and move forward. Use care not to disconnect wires from seat switch. See

Figure 4.41.

KNOBS AND MOVE

/

/

FIGURE 4.41

4.Remove negative ( - ) cable first.

5.Remove positive ( + ) cable last.

6.Remove battery. See Figure 4.42.

WARNING

Cables must be connected to battery terminals in the proper position as shown in Figure 4.42. DO NOT attempt to charge battery while installed on tractor. DO NOT use "BOOST" chargers on the battery.

POSITIVE

4.5.2.BATTERY INSTALLATION

1.Slide battery into battery housing.

2.Connect positive (+) cable first.

3.Connect negative (-) cable last.

4.Reinstall seat assembly. Use care not to disconnect wires from seat switch.

5.Reinstall the two adjusting knobs.

6.Lower operator's seat.

WARNING

The electrolyte (acid) produces a highly explosive gas. Keep all sparks, flame and fire away from area when charging battery or when handling electrolyte or battery. Electrolyte (acid) is a highly corrosive liquid. Wear eye protection. Wash affected areas immediately after having eye or skin contact with electrolyte (acid). Battery acid is corrosive. Rinse empty acid containers with water and mutilate before discarding. If acid is spilled on battery, bench, or clothing, etc., Flush with clear water and neutralize with baking soda.

4.5.3.BATTERY SERVICE

1.Remove battery. See Section on Battery Removal.

2.Place battery in a well ventilated area on a level surface.

3.Using distilled water, refill cells as required to cover cell plates of which can also be visualized through the plastic battery case.

4.With cell caps removed, connect battery charger to battery terminals. Red to positive (+) terminal and black to negative (-) terminal.

5.Slow charge battery at 1 amp for 10 hours.

6.If battery will not accept charge or is partially charged after 10 hours of charging at 1 amp, replace with new battery.

4.5.4.BATTERY STORAGE

When out of season, it is recommended the battery be removed, charged and stored.

1.Remove battery. (Refer to Section "BATTERY REMOVAL").

2.Perform battery service.

3.Bring battery to full charge, if required.

4.Store battery in an area away from the RIDER on a wood surface. DO NOT STORE BATTERY ON A CONCRETE SURFACE.

REMOVE NEGATIVE (-)

CABLE FIRST

FIGURE 4.42

WARNINGthel

DO NOT attempt to charge battery while installed on the

 

machine. DO NOT use "BOOST" chargers on

I

battery. DO NOT OVERFILL!

30

Page 30
Image 30
Snapper L T150H38GKV, L T145H33GBV Battery Battery Removal, Battery Installation, Battery Service, Battery Storage

L T150H38GKV, L T145H38GBV, L T145H33GBV specifications

The Snapper L T145H33GBV, L T145H38GBV, and L T150H38GKV are innovative lawn mowers designed to tackle various lawn care tasks with efficiency and ease. These models blend technology and ergonomics to deliver superior cutting performance, making them a popular choice among both homeowners and professional landscapers.

One of the standout features of the Snapper L series is its robust engine options, providing reliable power for efficient mowing. The L T145H33GBV model is equipped with a 14.5 HP Briggs & Stratton engine, ensuring a strong and consistent performance even in challenging terrains. Similarly, the L T145H38GBV and L T150H38GKV models come with enhanced engine capabilities, offering higher horsepower ratings for tackling larger lawns and tougher grass types.

The cutting deck design is another hallmark of the Snapper L series. The 33-inch cutting deck on the L T145H33GBV allows for tight maneuverability, making it ideal for smaller yards or areas with obstacles. The L T145H38GBV and L T150H38GKV feature wider decks, up to 38 inches, allowing for quicker mowing of expansive lawns. These decks are designed for precision cutting, providing a clean finish while reducing the need for multiple passes.

Ease of use is a priority with these models. The Snapper L series incorporates user-friendly controls that allow for smooth operation, including an adjustable seat for comfort during longer mowing sessions. The zero-turn capability of the L T150H38GKV model allows for agile movements, enabling effortless navigation around flower beds and trees.

Durability is another key characteristic. Constructed with high-quality materials, these mowers are built to withstand rigorous use. The stainless-steel frames and heavy-duty wheels ensure stability and longevity, making them a worthwhile investment for lawn care enthusiasts.

Moreover, Snapper mowers feature advanced technologies such as electric start systems for quick and easy initiation of the engine. The inclusion of mulching capabilities transforms clippings into nutrient-rich mulch, promoting a healthier lawn while reducing waste.

In summary, the Snapper L T145H33GBV, L T145H38GBV, and L T150H38GKV lawn mowers offer a perfect combination of power, cutting precision, and usability. With advanced engine technology, durable construction, and innovative features, these mowers stand out in the crowded landscaping market, making them a reliable choice for achieving a well-maintained lawn.