Section 4 - ADJUSTMENT & REPAIR

WARNING

DO NOT attempt any adjustments, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remove key. Remove spark plug wire from spark plug and secure wire away from spark plug. Engine and components can be extremely

hot. Avoid burns by allowing engine and components sufficient time to cool.

4.2.9.38" DECK LEVEL ADJUSTMENT

(FRONT TO REAR)

1.Position the blades as shown. See Figure 4.16.

FRONT OF TRACTOR

11,

FIGURE 4.16

2.Measure the distance from the left front blade tip to the ground and from the right rear blade tip to the ground. The front left blade tip should be between 1/8" and 3/8" higher than the right rear (factory setting). If it is between 1/8" and 3/8" you are finished with adjustment.

3.If it is not within specifications, adjust by raising or lowering the front of the deck using the swivel on the front lift rod. Turning the swivel clockwise will raise the front of the deck. Turning the swivel counterclockwise will lower the front of the deck.

NOTE: The deck should be set so that the rear of the deck is 1/4" lower than the front. See Figure 4.17.

REAR TO FRONT VIEW OF DECK

X

X - 1/8"

I

 

1

L ANGLE IRON1

FIGURE 4.17

4.3TRACTOR DRIVE COMPONENTS 4.3.1. BRAKE ADJUSTMENT

When adjusted properly, the brake should stop the tractor in approximately 6 feet or less from top speed. Drive the machine at maximum forward speed and apply the brake. If stopping distance is greater than 6 feet. brake adjustment is required.

1.Turn engine "OFF" Remove key.

2.Locate brake adjustment nut underneath the left side at the rear of tractor. See Figure 4.18.

3.Turn nut 1 turn clockwise to increase braking action. DO NOT over tighten brake adjustment.

4.Start engine and test brake.

5.Continue adjustment as described above until proper brake function is achieved

ROTATE ADJUSTING NUT CLOCKWISE TO

INCREASE BRAKING OR COUNTER

CLOCKWISE TO DECREASE BRAKING

FIGURE 4.18

22

Page 109 Page 111
Page 110
Image 110
Snapper L T145H38GBV, L T150H38GKV, L T145H33GBV important safety instructions Deck Level Adjustment Front to Rear
Page 109 Page 111

L T150H38GKV, L T145H38GBV, L T145H33GBV specifications

The Snapper L T145H33GBV, L T145H38GBV, and L T150H38GKV are innovative lawn mowers designed to tackle various lawn care tasks with efficiency and ease. These models blend technology and ergonomics to deliver superior cutting performance, making them a popular choice among both homeowners and professional landscapers.

One of the standout features of the Snapper L series is its robust engine options, providing reliable power for efficient mowing. The L T145H33GBV model is equipped with a 14.5 HP Briggs & Stratton engine, ensuring a strong and consistent performance even in challenging terrains. Similarly, the L T145H38GBV and L T150H38GKV models come with enhanced engine capabilities, offering higher horsepower ratings for tackling larger lawns and tougher grass types.

The cutting deck design is another hallmark of the Snapper L series. The 33-inch cutting deck on the L T145H33GBV allows for tight maneuverability, making it ideal for smaller yards or areas with obstacles. The L T145H38GBV and L T150H38GKV feature wider decks, up to 38 inches, allowing for quicker mowing of expansive lawns. These decks are designed for precision cutting, providing a clean finish while reducing the need for multiple passes.

Ease of use is a priority with these models. The Snapper L series incorporates user-friendly controls that allow for smooth operation, including an adjustable seat for comfort during longer mowing sessions. The zero-turn capability of the L T150H38GKV model allows for agile movements, enabling effortless navigation around flower beds and trees.

Durability is another key characteristic. Constructed with high-quality materials, these mowers are built to withstand rigorous use. The stainless-steel frames and heavy-duty wheels ensure stability and longevity, making them a worthwhile investment for lawn care enthusiasts.

Moreover, Snapper mowers feature advanced technologies such as electric start systems for quick and easy initiation of the engine. The inclusion of mulching capabilities transforms clippings into nutrient-rich mulch, promoting a healthier lawn while reducing waste.

In summary, the Snapper L T145H33GBV, L T145H38GBV, and L T150H38GKV lawn mowers offer a perfect combination of power, cutting precision, and usability. With advanced engine technology, durable construction, and innovative features, these mowers stand out in the crowded landscaping market, making them a reliable choice for achieving a well-maintained lawn.
Top Page Image Contents