Section 4 - ADJUSTMENT & REPAIR

WARNING

DO NOT attempt any adjustments, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remove key. Remove spark plug wire from spark plug and secure wire away from spark plug. Engine and components can be extremely

hot. Avoid burns by allowing engine and components sufficient time to cool.

4.3.2.STEERING ADJUSTMENT

Should excessive "Play" be noted in the steering, adjust as follows:

1.Turn engine "OFF". Remove key.

2.From left side of tractor, locate the steering sector below fuel tank. See Figure 4.19.

I_-----_FUELTANK

ROTATE TO

REDUCE "PLAY" _.

MOUNTING NUT

4.Turn the neutral adjustment nut 1/4 turn clockwise to reduce FORWARD creep. Turn the adjustment nut 1/4 turn counter clockwise to reduce Reverse creep. Only turn the adjustment nut in 1/4 turn increments.

5.Check for creep in neutral. Start engine. Move speed control lever to rear edge of the neutral detent. Machine should not move. If further adjustment is required, stop engine and repeat Step 4.

NEUTRAL

ADJUSTMENT

NUT

TURN NUT CLOCKWISE TO

REDUCE FORWARD CREEP

FIGURE 4.20

WARNING

DO NOT adjust shift linkage with engine running. The

adjustment requires hands to be close to rotating parts. STOP engine. REMOVE key.

FIGURE 4.19

3.Loosen the eccentric mounting nut and rotate the eccentric clockwise until steering "Play" is reduced. See Figure 4.19.

4.Tighten eccentric mounting nut.

4.3.3.SHIFTER ADJUSTMENT

The shift linkage is set at the factory and should not require further adjustment. The shifter is adjusted properly when the speed control lever can be placed at rear edge of the neutral detent and the tractor remains absolutely stationary. If motion is detected, neutral adjustment will be required. DO NOT operate a machine that creeps when shifted to neutral.

1.Stop engine. Remove key.

2.Move speed control lever to rear edge of neutral detent and hold firmly.

3.Locate neutral adjustment nut underneath the right rear of the tractor. See Figure 4.20

23

Page 23
Image 23
Snapper L T145H38GBV, L T150H38GKV, L T145H33GBV important safety instructions Steering Adjustment, Shifter Adjustment

L T150H38GKV, L T145H38GBV, L T145H33GBV specifications

The Snapper L T145H33GBV, L T145H38GBV, and L T150H38GKV are innovative lawn mowers designed to tackle various lawn care tasks with efficiency and ease. These models blend technology and ergonomics to deliver superior cutting performance, making them a popular choice among both homeowners and professional landscapers.

One of the standout features of the Snapper L series is its robust engine options, providing reliable power for efficient mowing. The L T145H33GBV model is equipped with a 14.5 HP Briggs & Stratton engine, ensuring a strong and consistent performance even in challenging terrains. Similarly, the L T145H38GBV and L T150H38GKV models come with enhanced engine capabilities, offering higher horsepower ratings for tackling larger lawns and tougher grass types.

The cutting deck design is another hallmark of the Snapper L series. The 33-inch cutting deck on the L T145H33GBV allows for tight maneuverability, making it ideal for smaller yards or areas with obstacles. The L T145H38GBV and L T150H38GKV feature wider decks, up to 38 inches, allowing for quicker mowing of expansive lawns. These decks are designed for precision cutting, providing a clean finish while reducing the need for multiple passes.

Ease of use is a priority with these models. The Snapper L series incorporates user-friendly controls that allow for smooth operation, including an adjustable seat for comfort during longer mowing sessions. The zero-turn capability of the L T150H38GKV model allows for agile movements, enabling effortless navigation around flower beds and trees.

Durability is another key characteristic. Constructed with high-quality materials, these mowers are built to withstand rigorous use. The stainless-steel frames and heavy-duty wheels ensure stability and longevity, making them a worthwhile investment for lawn care enthusiasts.

Moreover, Snapper mowers feature advanced technologies such as electric start systems for quick and easy initiation of the engine. The inclusion of mulching capabilities transforms clippings into nutrient-rich mulch, promoting a healthier lawn while reducing waste.

In summary, the Snapper L T145H33GBV, L T145H38GBV, and L T150H38GKV lawn mowers offer a perfect combination of power, cutting precision, and usability. With advanced engine technology, durable construction, and innovative features, these mowers stand out in the crowded landscaping market, making them a reliable choice for achieving a well-maintained lawn.