Snapper SPE150KH, SPE1250KW, SPE140KW Adjusting Fixed Deck Attachment, Side Profile of Unit

SECTION 3 - OPERATING INSTRUCTIONS

3.11ADJUSTING BLADE ON CUTTER SPINDLE (Continued)

CUTTER			SPACERS
HOUSING	t!l_	_	ON TOP
PULLEY ._...	_......--,
	,....,,,.,,,,,,....._
			CUTTER
I		r"	HOUSING
BLAOl f			BOTTOM
			SPACERS ON
_1

u_

FIGURE 3.14

3.12 ADJUSTING FIXED DECK ATTACHMENT

The mower deck has four different positions for attaching it to the power unit. The lowest setting provides a cutting height range of 1-1/2" to 2-1/2", the middle low cut is 2- 1/4" to 3-1/4", the middle high cut is 3" to 4", and highest cut is 3-3/4" to 4-3/4". Make sure the spacers on the caster wheels are moved up or down as shown to correspond with the bolt )ositions to keep deck level. Once a desired cutting height is reached, attach the mower deck to the power unit by installing 3 bolts on each side in selected height of cut holes. Tighten bolts to 70 to 80 foot pounds torque. See Illustration.

SIDE PROFILE OF UNIT

	BLACK DOTS
POWER	REPRESENT
	BOLT ANCHOR
UNIT _	HOLES

SPACERS

FIGURE 3.15C: MIDDLE HIGH CUT 3" TO 4"

SPACERS

FIGURE 3.15D: HIGH CUT 3-3/4" TO 4-3/4"

FIGURES 3.15C-D

• REAR

FIGURE 3,15A: LOW CUT 1-1/2"TO 2-1/2"

FIGURE 3.15B: MIDDLE LOW CUT 2-1/4" TO 3-1/4"

FIGURES 3.15A-B

16