Snapper ZM2200K, ZM2200KU, ZM2500K, ZM2500KH, MZM2200KH, ZM5200M, ZM6100M Adjustments & Repair

Section 4 - ADJUSTMENTS & REPAIR

WARNING

DO NOT attempt any maintenance, adjustments or service with engine running. STOP engine. STOP blades. Set brake. Remove key. Remove spark plug wires and secure away from spark plugs. Engine and components are HOT. Avoid serious burns, allow sufficient time for all parts to cool.

4.3PARKING BRAKE ADJUSTMENT

1. The parking brake can be adjusted by removing the rod from the lever and rotating it clock-wise to increase brake tension. When properly adjusted, the parking brake lever should require 18 to 22 pounds of force to set the brake. If this adjustment does not result in proper braking action contact your authorized SNAPPER dealer for corrective action. See Figure 4.3.

4.4ENGINE ADJUSTMENTS & REPAIR

Refer to the engine owner’s manual for engine adjustments and/or repairs.

WARNING

Wear heavy leather gloves when handling or working around cutting blades. Blades are extremely sharp and can cause severe injury. DO NOT use a cutting blade that shows signs of excessive wear or damage.

4.5MOWER BLADE REPLACEMENT

4.5.1.BLADE WEAR LIMITS

1. Inspect blade frequently for signs of excessive wear or damage. See Figure 4.4.

WARNING

Do not operate this machine if the brakes are not functioning properly!

PARKING

BRAKE

LEVER

PARKING

BRAKE

ROD

FIGURE 4.3

NEW BLADE

WEAR LIMIT (NOTCH STARTS)

DANGEROUS CONDITION!

DO NOT USE ON MOWER!

REPLACE WITH NEW BLADE.

FIGURE 4.4

17