Section 2 - OPERATING INSTRUCTIONS
2.2.5. PARKING BRAKE
1.Engage parking brake by pulling the parking brake lever back to the engaged position.
NOTE: Motion control lever (joystick) must be in the Neutral position to engage brake. See Figure.
NOTE: Engaging the parking brake locks the motion control lever (joystick) in the neutral position.
2.Release parking brake by pushing parking brake lever forward to the released position. See Figure 2.7.
JOYSTICK IN
NEUTRAL
POSITION
PARKING BRAKE LEVER IN ENGAGED “ON”
POSITION
WARNING
DO NOT park the machine on slopes. DO NOT leave machine with engine running. Stop engine. Stop blades. Engage parking brake. Remove key.
FIGURE 2.6
PARKING BRAKE LEVER
IN RELEASED “OFF”
POSITION
FIGURE 2.7
8
