Simplicity / Snapper ZTR

B

B

 

B

A

 

Figure 16. PTO Clutch Adjustment

A.Adjustment Window (Qty. 3, one shown)

B.Adjustment Nut

A

B

C

Figure 17. Adjust PTO Clutch

A.Window

B.Adjustment Nut

C. .016”-.018” (0,40-0,45mm) Feeler Gauge

PTO Clutch Adjustment

Check the PTO clutch adjustment after every 100 hours of operation. Also perform the following procedure if the clutch is slipping or will not engage, or if a new clutch has been installed.

1.Remove key from ignition switch and disconnect spark plug wires to prevent the possibility of accidental starting while the PTO is being adjusted.

2.See Figure 16. Note the position of the 3 adjustment windows (A) in the side of the brake plate and the nylock adjustment nuts (B).

3.Insert a .016”-.018” (0,40-0,45mm) feeler gauge (C) through each window, positioning the gauge between the rotor face and the armature face as shown in Figure 17.

4.Alternately tighten the adjustment nuts (B, Figure 16) until the rotor face and armature face just contacts the gauge.

5.Check the windows for an equal amount of tension when the gauge is inserted and removed, and make any necessary adjustments by tightening or loosening the adjustment nuts.

NOTE: The actual air gap between the rotor and armature may vary even after performing the adjustment procedure. This is due to dimensional variations on component parts, and is an acceptable condition.

6.Check the mower blade stopping time. The mower blades and mower drive belt should come to a complete stop within five seconds after the electric PTO switch is turned off.

WARNING

To avoid serious injury, perform adjustments only with engine stopped, key removed and rider on level ground.

Blade Brake Check

Mower blades and mower drive belt should come to a complete stop within five seconds after electric PTO switch is turned off.

1.With parking brake engaged, PTO disengaged and an operator in the seat, start the engine.

2.Have an assistant observe the mower drive belt through the opening between the frame and top of mower deck. Engage the PTO and wait several seconds. Disengage the PTO and check the amount of time it takes for the mower drive belt to stop.

3.If the mower drive belt does not stop within five seconds, perform the PTO Clutch Adjustment. If the belt still does not stop within 5 seconds, replace the clutch.

TP 300-7337-01-CH-SMN

14

8/2007

Page 13 Page 15
Page 14
Image 14
Snapper ZT3000 manual PTO Clutch Adjustment, Blade Brake Check
Page 13 Page 15

ZT3000 specifications

The Snapper ZT3000 is a robust and versatile zero-turn mower designed for homeowners and landscapers seeking efficiency and precision in their lawn care routine. With its powerful engine and user-friendly features, the ZT3000 has quickly become a popular choice among lawn enthusiasts.

One of the standout features of the Snapper ZT3000 is its heavy-duty 11-gauge steel frame, providing durability and stability while navigating various terrains. This construction ensures that the mower can withstand the rigors of frequent use, making it a reliable investment for maintaining large lawns.

The ZT3000 is powered by a reliable Kohler engine, which delivers impressive horsepower and torque. This power enables the mower to tackle tough grass and diverse landscapes with ease. Its responsive acceleration allows operators to swiftly navigate around obstacles, making mowing more efficient and enjoyable. With a top speed of 7 mph, this machine presents a brisk pace for completing mowing tasks in less time.

One of the key features of the Snapper ZT3000 is its patented, foot-operated deck lift, which allows users to adjust the cutting height with ease. This feature enables quick customization of the cutting height from 1.5 inches to 4.5 inches in increments, ensuring a precise cut tailored to the specific needs of your lawn. The mower's wide 42-inch or 52-inch cutting deck not only allows for a larger mowing area but also enhances maneuverability in tight spaces.

Safety is also a priority with the ZT3000. It is equipped with an automatic blade brake system, which stops the blades within seconds when the operator leaves the seat. This feature adds a layer of safety when maneuvering or engaging in tasks outside of mowing.

Additionally, the Snapper ZT3000 offers a comfortable seating experience with an ergonomic high-back seat that minimizes fatigue during extended mowing sessions. The intuitive controls and responsive steering levers provide ease of operation, making it accessible for both novice and experienced users.

In summary, the Snapper ZT3000 combines rugged performance, innovative technology, and user-friendly features. Its powerful engine, durable construction, adjustable cutting height, and safety systems make it an ideal choice for anyone looking to achieve a well-manicured lawn with minimal effort.
Top Page Image Contents