Snapper ZT3000 manual Attention Setup Personnel, Table Of Contents, TP 300-7337-01-CH-SMN

Dealer Setup

& Adjustment Instructions

Simplicity ZT3000 / Snapper 355Z

Zero-Turn Riders & Mowers

This Dealer Setup Instruction covers the following products:

Mfg. No. Description

Simplicity Models:

5900660 ZT3000B2444, Simplicity 24HP Briggs & Stratton ZT3000 Zero-Turn Rider with 44” Mower

5900662 ZT3000B2450, Simplicity 24HP Briggs & Stratton ZT3000 Zero-Turn Rider with 50” Mower

5900684 ZT3000B2450CE, Simplicity 24HP Briggs & Stratton ZT3000 Zero-Turn Rider with 50” Mower (CE/Export)

Snapper Models:

5900681 Snapper 355ZB2444

5900682 Snapper 355ZB2450

5900685 Snapper 355ZB2450CE

ATTENTION SETUP PERSONNEL:

The safety warnings provided in this guide and in the operator's manual included with the unit contain

important information that must be obeyed when assembling, setting-up, operating, servicing,

transporting, or storing the unit.

These warnings are highlighted by the safety alert triangle symbol shown above, which signifies that an important safety message is being provided.

You must read, understand, and follow these warnings and instructions, and use safe shop and work practices at all times while working on or around this unit and all other outdoor power equipment.

Sections and items denoted by the Setup symbol provide the information necessary to fully assemble, test, and prepare the units described above for delivery to your customers.

Additional information concerning functional tests, general adjustment procedures, and the location of normal lubrication points are included in these instructions.

TABLE OF CONTENTS:
SAFETY RULES	2
SETUP PROCEDURES
Quick Setup List	3
Uncrating	4
Battery Activation & Installation	4
Rider Assembly	5
Seat and Safety Switch Assembly	5
Install Ground Speed Control Levers	5
Check Fluid levels	5
Fill and Check Engine Oil	6
Check Transmission Oil Level	6
Reduce and Check Tire Pressure	6
Torque Mower Blades	7
Lubrication	7
Perform Safety Checks	8
Functional Tests	8
Mower Blade Stopping Check	8
Seat Switch Connection	8
Burnish PTO Clutch	8
Safety Interlock System	9
ADJUSTMENT PROCEDURES
Seat Adjustments	10
Ground Speed Control Lever Adjustment	10
Operator Adjustment	10
Speed Balancing Adjustment	11
Return-To-Neutral & Neutral Adjustment	11
Parking Brake Adjustment	12
Suspension Adjustment	13
PTO Clutch Adjustment	14
PTO Clutch Adjustment	14
Blade Brake Check	14
Mower Deck Leveling	15
Roller Bar Leveling	16

SERVICE PROCEDURES
Transmission Oil Filter Change	17
Hydraulic Pump Drive Belt Replacement	18
Mower Belt Replacement	19

		Form No. 5101067
		Revision 01
		Rev. Date: 8/2007
8/2007	1	TP 300-7337-01-CH-SMN