5.2 Batteries
Handling the remote control and batteries:
-Avoid exposing the remote control to heat and humidity
-When not using the remote control for a long period of time, remove the batteries.
-Avoid using the RC 3000 remote control with the infrared control and service light on for a long time as battery life would then be reduced.
-Do not use new and old batteries together or batteries of a different voltage or type.
-Handle the remote control with care.
-Use the remote control within its operating range (about 10 metres and a 30° angle)
Note: The RC3000 remote control is powered by AA 1.5 V batteries
RC 3000
BACK OF THE
REMOTE
CONTROL
4 AA 1.5 V batteries
|
| 1 |
O L T |
| 9V battery |
| ||
9 V | IEC6F22 | |
|
| |
|
|
|
5.3How the RC 3000 remote control works
Some buttons of the RC3100 remote control having the same icons of the RC3100 perform the same function, so the description is not repeated. The following paragraphs describe the functions of the RC3000 remote control.
SVP 450 PLUS - SVD 500 PLUS
5.4 Video setup
5.4.1To change the Y/C delay.
5.4.2To switch on/off the comb filter.
5.4.3To setup the gamma adjustment.
5.4.4To switch on/off the adaptive black.
5.4.5To switch on/off the blue stretch.
5.4.1To setup the Y/C delay, you must enter the installation mode.
Press VID.S, the following menu will appear.
VIDEO SETUP
Y/C DELAY
WHITE BALANCE
COMB. FILTER
GAMMA ADJ.
ADAPTIVE BLACK
BLUE STRETCH
Use the arrow or to select the Y/C delay and press ENTER to confirm, the following menu will appear:
Use the arrow or to change the Y/C delay value.
VIDEO SETUP
Y/C DELAY | 00 |
The value is correct when you are displaying a video signal with colour bars and they are not overlapping.
Upon pressing the EXIT button to return to the video setting menu, the following message will appear:
VIDEO SETUP
Y / C DELAY | 12 |
STORE DATA ?
Press ENTER to confirm the setting or the EXIT button to exit. Press EXIT to return to the video setting menu.
ENGLISH
25