Sim2 Multimedia SVP 450 PLUS Muting video button, Normalised button, UPC button, Freeze button

Models: SVD 500 PLUS SVP 420 HB SVP 450 PLUS

1 44
Download 44 pages 30.99 Kb
Page 12
Image 12
3.10 Muting video button

3.10 Muting video button

Press MUTE for about 2 seconds. The picture will darken while the projector stays on; the picture will reappear immediately if you press the button again.

3.11 Normalised button

Press 3.11 Normalised button3.12 UPC button. The adjustments relative to contrast, brightness, colour saturation, hue and peaking, stored in the current bank, will be loaded automatically.

3.12 UPC button

Press UPC. It will turn on or off the converter that doubles the input signal lines.

Note: only on models with UPC.

3.13 Freeze button

Press Note: only on models with UPC.3.13 Freeze button3.14 Video menu. To have a still picture. When pressed again the picture will run normally.

This function is only active if the UPC converter is active.

3.14 Video menu

To select the input standard (PAL, SECAM, NTSC 3.58, NTSC 4.53).

Press the Manual background button for at least 2 seconds to enter the video menu.

The following menu will appear:

VIDEO MENU

NOISE RED.

STD SELECT.

BLANKING

WHITE BALANCE

UPC MENU

TLV SYNC

Press Manual backgroundManual background . Select SELEZ STD and press ENTER to confirm, the following menu will be displayed:

The left arrow indicates the present setting. Use the arrows

STD SELECTION

AUTO DETECT

PAL

SECAM

NSTC 3.58

NSTC 4.43

Manual backgroundManual background to select the video input standard or the automatic selection mode. Press ENTER to confirm.

SVP 450 PLUS - SVD 500 PLUS

Press EXIT to return to the previous menu. Press ESC to exit the menu.

To turn on or off the noise reduction: this menu allows you to activate a frequency filter.

Press Manual background for at least 2 seconds, the following menu will be dispalyed:

Use the arrows Manual backgroundManual background to select NOISE RED. and press ENTER to confirm, the following menu will be displayed:

VIDEO MENU

NOISE RED.

STD SELECTION

BLANKING

WHITE BALANCE

UPC MENU

TLV SYNC

Use the arrows Manual backgroundManual background to turn the noise reduction option on and off.

VIDEO MENU

NOISE RED.

OFF

Press EXIT to return to the previous menu. Press ESC to exit the menu.

Note: the noise reduction filter allows a reduction of the noise on the video signal, which also implies a reduction in the picture peaking.

To turn on or off the TLV sync: with this menu you can synchronise signals with TRI-LEVEL synchronism for the Japanese, high-definition system.

Press Manual background for at least 2 seconds, the following menu appears:

VIDEO MENU

NOISE RED.

STD SELEC.

BLANKING

WHITE BALANCE

UPC MENU

TLV SYNC

ENGLISH

11

Page 12
Image 12
Sim2 Multimedia SVP 450 PLUS manual Muting video button, Normalised button, UPC button, Freeze button, Video menu, English