SVP 450 PLUS - SVD 500 PLUS
Use the arrows
to select TLV SYNC and press ENTER to confirm, the second menu appears:
VIDEO MENU
BLANKING
H. = 00 | V. = 00 |
TLV SYNC | ON |
Use the arrows 
for function selection. The TLV SYNC selection is active only if the signal is 33,7KHz 60Hz. Press EXIT to return to the previous menu.
Press ESC to exit the menu.
3.15 Blanking
To adjust blanking to the left, right, upper and lower of the projected picture.
Press 
for at least 2 seconds, the following menu appears:
VIDEO MENU
NOISE RED.
STD SELEC.
BLANKING
WHITE BALANCE
UPC MENU
TLV SYNC
Use the arrows 
to select BLANKING and press ENTER to confirm.
BLANKING
H. = 00 | V. = 00 |
Press the arrows 
to change the figures relevant to the vertical size of the blanking window on the upper part of the screen.
Press the arrows 
to change the figures relevant to the horizontal size of the blanking window on the left part of the screen.
Press ENTER to enter the secon part of the blanking adjustment.
Press the arrows 
to change the figures relevant to the vertical size of the blanking window on the lower part of the screen.
Press the arrows 
to change the value of the horizontal size of the blanking window on the right part of the screen. Press MEMO to store the adjustements carried out. Press EXIT to return to the previous menu. Press ESC to exit.
Note:The purpose of this function is that of allowing a perfect qsquaring of the picture screen by cutting out any disturbances such as vertical and horizontal scanning consequencies, or disturbances deriving from VCR activity.
3.16 White menu
To select a preset colour temperature according to the projected picture.
Press 
for at least 2 seconds, the screen displays the first menu:
VIDEO MENU
NOISE RED.
STD SELEC.
BLANKING
WHITE BALANCE
UPC MENU
TLV SYNC
Use the arrows 
to select WHITE ADJ. and press ENTER to confirm, the screen displays the second menu: The left arrow shows the present setting.
WHITE BALANCE
SET TO 3200 K
SET TO 6500 K
SET TO 9300 K
SET TO USER
Use the arrow 
to select the desired setting and press ENTER to confirm.
12
