Sim2 Multimedia SVD 500 PLUS, SVP 420 HB Screen corners corrections, How to reset the adjustments

5.15 Screen corners corrections

Upon pressing the ENTER button, you enter the corner adjustment menu, the folowing image will appear.

+		+
	CRT : RGB		ADJ / R . .
		ZONE
	H. = 50		V. = 60
+		+

Press EXIT or ENTER to change.

Press ESC to exit.

5.16 How to reset the adjustments

Note: Resetting means setting all adjustment values at 50 that corresponds to zero. Starting from this value you can adjust up to 100 or down to 0.

To reset adjustments read the following instructions carefully.

While in the deflection setup, by pressing the RESET button, the deflection parameters, convergence and the zones for the R,G,B, tubes are reset. While in the ceonvergence setup, by pressing the RESET button, the convergence parameters and the zone ones for the selected tube only are reset. While in the zone setup, by pressing the RESET button, the zone parameters are reset only for the selected tube. The following table shows which parameters are reset and in which menu.

RESET	RESET	COLOUR
	PARAMETER
	ZONE
DEFLECTION	DEFLECTION	ALL
	CONVERGENCE
CONVERGENCE	ZONE	ONLY THE
	CONVERGENCE	SELECTED COLOUR
ZONE	ZONE	ONLY THE
		SELECTED COLOUR

SVP 450 PLUS - SVD 500 PLUS

5.17How to store the convergence adjustments

To store convergence, deflection, and zone adjustments press MEMO

Thus entering the MEMORY MANAGER the following image will appear:

WORK		MEMORY MANAGER
08	BN	NAME		F	HOR	VER
LOAD	01	Pal Upc		N	31.2	50
COPY	02	. . . . .		-	--.-	---
	03	Pup 16/9		W	31.2	50
	04	Nstc		N	15.7	60
MOVE	05	NstcUpc		N	31.4	60
	06	Vga	2	N	35.1	56
DEL	07			N	37.6	68
		Vga	3

Mem adjusted value to bank

the current and highlighted memory bank. Use the arrow

or to select in which memory bank you wish to store the convergence settings and press ENTER to confirm,

or press EXIT to exit.

ENGLISH

37