Sim2 Multimedia SVD 500 PLUS, SVP 450 PLUS Screen format selection, VCR button Sync filter, Info

Models: SVD 500 PLUS SVP 420 HB SVP 450 PLUS

1 44
Download 44 pages 30.99 Kb
Page 11
Image 11
3.7 Screen format selection

SVP 450 PLUS - SVD 500 PLUS

COL 50

CON 80

LUM 35

PEAK 90

 

TIN

50

 

 

 

STORED

TIN

50

Each time this button is pressed, a different adjustment

will be selected, sequentially. Use the arrows , used to control the screen.3.8 VCR button (Sync filter) to change the value, press MEMO to store the new value. Press ESC to exit.

3.7 Screen format selection

To select the correct screen format:

(NORMAL, SMALL, 16/9, LETTER BOX, CINEMA,).

Press 3.9 InfoManual backgroundManual background . One of the previous screen formats will appear (for instance “normal”).

NORMAL

Each time you press a button relative to the AV inputs, you are choosing one of the format ratios stored in the relative memory bank. In the memory banks (see: Memory Manager) you can store several setups with the same input signal but with different format ratios.

Each time the Manual backgroundManual backgroundManual background, button is pressed the same signal is displayed with a different format ratio (only if it has been stored in the relative memory bank). The possible format ratios are: NORMAL (NORMAL=4/3); WIDE (16/9);

SMALL; LETTER BOX; CINEMA.

The message will disappear shortly afterwards.

Note: Only by selecting the SMALL format ratio format will you get +12V on the rear panel connector marked by

Manual backgroundManual backgroundManual background, used to control the screen.

3.8 VCR button (Sync filter)

To select the appropriate sync filter.

Press VCR to change the sync time constant. The following message will be diplayed:

FAST

Whenever you press the VCR button you toggle the sync filter type from FAST to SLOW and vice versa. The message will disappear shortly afterwards.

Note: FAST is recommended for the VCR. SLOW is recommended for video signal broadcasting.

3.9 Info

The INFO menu displays information on a current input signal.

Press the INFO button to access the menu for the information concerning the projector parameters and the picture settings.

INFORMATION 1 / 2

INPUT

VIDEO 2

H. FREQ.

15.62 KHz

V. FREQ.

50 Hz

UPC

NO

VIDEO STD

PAL

BANK NAME

Pal

BANK LOADED

02

Press INFO again. The second part of the information will be displayed relating to the picture parameters and settings.

INFORMATION 2 / 2

ASPECT RATIO

NORMAL

COLOUR TEM.

6500 K

INSTALL.

FRONT CEILING

SYNC

CVBS

SYNC. FILTER

FAST

SW. RELEASE

SW. 2.11

Press ESC to exit.

10

Page 11
Image 11
Sim2 Multimedia SVP 420 HB manual Screen format selection, VCR button Sync filter, Info, SVP 450 PLUS - SVD 500 PLUS