POWER ON
STAND BY
SWITCH ON
To switch on or off the VCR stability, you must enter the installation mode.
Press the OPT button, vi apparirà the following menu:
OPTIONS MENU
OSD
INSTALL. TYPE
POWER ON
VCR STABILITY
MEMORY MANAGER
WORKING TIME
Use the arrow 
or 
to select VCR STABILITY the following menu will appear:
OPTIONS MENU
VCR STABILITY | ON |
Use the arrow 
or 
to switch on or off this function. Whenever VCR stability is on, the video projector will decode a signal with
Press the EXIT button to return to the options menu.
5.11 Fine picture adjustments
This paragraph is very important to achieve a perfect fine adjustment of the projector once it has been installed.
Read the following pages carefully.
It is very important to synchronise the projector with the most frequently used input signals. The settings of each signal type must be stored in a memory bank.
SVP 450 PLUS - SVD 500 PLUS
5.12 Deflection
First of all you must enetr the installation mode.
Press DEF to enter the deflection adjustment mode. Now you can carry out all the adjustments necessary to align the green tube image to the screen centre.
Throughly read these instructions if you are not familiar with these adjustments
5.12.1 Deflection centre
The horizontal control DEF CENT is a PHASE control and it does not affect the inner test patterns.
This function allows to centre the output signal image as to the raster: you gain access to this menu by means of the DEF button.
RASTER
- PICTURE -
DEFL CENT
H. = 62 | V. = 50 |
Use the arrow to centre the raster on the screen. Press ENTER or EXIT to change function. Press ESC to exit.
5.12.2 Deflection linearity
This function allows to change the distance between lines, until they are equally distant.
|
| b |
|
|
| DEFL LIN |
|
a |
|
| a |
H. = | 50 | V. = | 50 |
|
| b |
|
ENGLISH
33
