SVP 450 PLUS - SVD 500 PLUS
3 USER REMOTE CONTROL RC 3100
RC 3100 is the User Remote Control for normal programme selection and analogue adjustments (once the projector is installed). The projector is controlled by the infrared ray remote control (I.R.) whose maximum range is approximately 10 metres with new batteries.
The following figure describes the functions of the buttons on the User Remote Control.
Displays the selection menu of the available video inputs
Right arrow
Up arrow
Down arrow
Left arrow
Confirms choice
To return to the previous menu
To store image adjustments.
To select the type of sync filter between FAST or SLOW.
Will give you a still frame when the UPC converter is ON.
To switch the UPC ON or
OFF
To switch the projector ON or OFF.
| 1 | 2 | 3 | 4 |
| ||||||
|
|
|
|
|
|
|
|
|
|
|
|
| 5 | 6 | 7 | 8 |
| ||||||
|
|
|
|
|
|
|
|
|
|
|
|
| 9 |
|
|
|
|
|
|
| |||
|
|
| AV/0 |
|
| ESC... | |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
- 
+ •••
EXIT ENTER
VCR MEMO
UPC MUTE INFO
To select the signal input wanted directly.
Also used to turn the projector ON.
To exit from any menu
To change the contrast, brightness, peaking, hue and colour saturation values.
To store the contrast, brightness, peaking, hue and colour saturation values.
Not active
To recall NORMALISED values of brightness, contrast, peaking, hue and saturation
To select screen format (Small, Normal, Wide 16/9, Cinema, Letter Box
To display status and displayed signal information
To switch the picture on/off keeping the projector on (muting video).
8
