3.1 Batteries
Handling the remote control and batteries:
-Avoid exposing the remote control to heat and humidity.
-When not using the remote control for a long period of time, remove the batteries.
-Do not use new and old batteries together or batteries of a different voltage or type.
-Do not drop or mishandle the remote control.
-Use the remote control within its operating range (about 10 metres and a 30° angle)
Note: The RC3100 remote control is powered by two AA batteries.
RC 3100
BACK OF THE
REMOTE CONTROL
2 AA
1.5 V
batteries
3.2 RC 3100 User Remote Control
Read this chapter through carefully before altering any values or making any adjustments.
3.3 Projector Power On
-To turn the projector on or off, press the power swith, (a red led lights up on the rear panel), if after a few seconds the led does not turn green, press for a second.
-To turn the projector off, press for a longer time. Wait at least 3 seconds before turning the projector on again, or else the command will be ignored.
3.4 Language menu
To select the language desired for the screen displays:
Press
SVP 450 PLUS - SVD 500 PLUS
LANGUAGES
Deutsch
English
Espanol
Francaise
Italiano
Portoguese
The left arrow indicates the language in use. Use the arrows
to select the desired language. Press ENTER to confirm the selection.
Press ESC to exit the menu.
3.5 Input selection
Select a programme AV and/or the relevant input connector.
To select the input directly use a numerical button or: press
Press the relevant number to select the desired video input;
INPUT SELECT
1SCART / VIDEO 1
2VIDEO 2
3SCART /
4SCART / RGB
5
6YCrCb
7BNC 15 KHz
8BNC
9VGA
0 YCrCb 32 KHz
Note: The input Num.0 appairs only on the models provided by the progressive component input.
i.e. if one wishes to select video 2 press
VIDEO 2
3.6 Picture adjustment
To change the value of CONTRAST, BRIGHTNESS,
COLOUR, HUE (STANDARD NTSC), PEAKING.
Press the button for a second, one of the five adjustments will appear (contrast, brightness, colour, peaking and hue).
ENGLISH
9