SVP 450 PLUS - SVD 500 PLUS
5 THE COMPLETE FUNCTION RC3000 REMOTE CONTROL
5.1 Complete function RC3000 remote control
There are two remote controls for the video projector. One, the RC3000, is a complete function remote control used to install the projector while the other one, the RC3100, is for normal use. Both control the projector with infrared rays. With the RC3000 remote control you can connect via cable directly to the video projector’s IR input so as to avoid any technical problems.
N.B.: (The cable is supplied with the projector. Standard length is 8m.).
The following pages explain the functions of the buttons on the RC3000 remote control.
Turns | the | UPC | converter |
| Jack connector for |
| Switches the picture |
on/off. |
|
|
|
| main cable. |
| on/off. |
|
|
|
|
|
|
|
|
Turns | the | video | projector |
|
|
|
|
on/off. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Switches the red tube on/off.
Switches the green tube on/off.
Switches the blue tube on/off.
Selects one of the available screen formats (Small, Nor- mal,Wide,Cinema,LetterBox)
Selects the right input directly.
Confirms current choice or goes to the next page in the current menu.
Returns to the previous menu or page.
Stores video settings.
Displays the selected video input menu.
Selects FAST or SLOW sync filter.
Adjusts peaking.
Adjusts hue for the NTSC standard.
Resets the adjustments made.
Not active.
Enters the deflection menu
Lights up the remote control buttons.
In the installation mode, it lets you enter the convergence menu.
Adjusts colour (saturation).
Stores peaking normalized adjustments: brightness, contrast, colour, hue.
In the installation mode itletsyouenterthezones menu.
Generates a test signal selectable from eight dif- ferent ones.
Switches the green channel adjustments on/off. In the video menu it lets you chan- ge the white balance.
Switches the blue channel adjustments on/off. In the video menu it lets you change the white balance.
Switches the red channel adjustments on/off. In the video menu it lets you change the white balance.
Up arrow.
Right arrow.
Left arrow.
Down arrow.
Still frame (FREEZE).
Adjusts contrast.
Restores the normalised values of brightness, contrast, colour, hue, peaking.
Enters the options menu.
Exits any menu.
Adjusts brightness.
Enters the video menu or adjusts brightness, contrast, colour, hue, peaking.
Enters the video installation menu.
Displays projector information.
24
