Sim2 Multimedia SVP 420 HB manual Move, Delete, SVP 450 PLUS - SVD 500 PLUS

The chosen bank will be highlighted. The following message will appear:

Copy from 05 to ?

Use the arrow or to select a memory bank (from 01 to

25)where to copy the information and press ENTER to confirm. The following message will appear:

Copy from 05 to 09 ?

Press ENTER to confirm. If the destination bank is available, the projector will ask you to insert a name for the bank and the following message will appear:

WORK		MEMORY MANAGER
08	BN			NAME		F	HOR	VER
LOAD	01		Pal Upc			N	31.2	50
COPY	02	. . . . .				-	--.-	---
	03		Pup 16/9			W	31.2	50
	04		Nstc			N	15.7	60
MOVE	05		NstcUpc			N	31.4	60
	06			ga	2	N	35.1	56
			V
DEL	07		Vga		3	N	37.6	68

Modify bank name

Use the arrow or to select the name’s letters (LABEL). Use the arrow or to change the cursor position. Repeat the procedure until the name is complete, then press ENTER. The following message will appear:

Data saved

Press EXIT to return to the previous menu. Press ESC to display the output video signal.

Note: The copy will be made even if the horizontal and vertical frequencies do not match those of the vi- deo input signal.

5.8.8 Move

This function allows you to move a memory bank to another position on the list

Use the arrow or to select MOVE.

WORK		MEMORY MANAGER
08	BN	NAME		F	HOR	VER
LOAD	01	Pal Upc		N	31.2	50
COPY	02	. . . . .		-	--.-	---
	03	Pup 16/9		W	31.2	50
	04	Nstc		N	15.7	60
MOVE	05	NstcUpc		N	31.4	60
	06	Vga	2	N	35.1	56
DEL	07	Vga	3	N	37.6	68

Move bank

SVP 450 PLUS - SVD 500 PLUS

Press ENTER to confirm. The following message will appear:

WORK		MEMORY MANAGER
08	BN	NAME		F	HOR	VER
LOAD	01	Pal Upc		N	31.2	50	H
							IS
	02	. . . . .		-	--.-	---
COPY	03	Pup 16/9		W	31.2	50	L
	04	Nstc		N	15.7	60	G
							N
MOVE	05	NstcUpc		N	31.4	60
							E
	06	Vga	2	N	35.1	56
DEL	07	Vga	3	N	37.6	68
Move from ?

Use the arrow or to select a memory bank (01 to 25) and press ENTER to confirm. The following message will appear:

Move from 01 to ?

Use the arrow or to select a destination bank available (01 to 25) and press ENTER. The following message will appear:

Move from 01 to 10 ?

Press ENTER to confirm, the following message will appear:

Done

Press EXIT to return to the previous menu.

Press ESC to repeat the procedure.

Note: If the destination bank is not free, the projector will overwrite the information, thereby causing the loss of all previously stored data.

5.8.9 Delete

This function allows you to delete a memory bank.

Use the arrow or to select the DELETE function.

WORK		MEMORY MANAGER
08	BN	NAME		F	HOR	VER
LOAD	01	Pal Upc		N	31.2	50
COPY	02	. . . . .		-	--.-	---
	03	Pup 16/9		W	31.2	50
	04	Nstc		N	15.7	60
MOVE	05	NstcUpc		N	31.4	60
	06	Vga	2	N	35.1	56
DEL	07	Vga	3	N	37.6	68

Delete bank

Press ENTER to confirm. The following message will appear:

Delete bank ?

Use the arrow or to select a memory bank to delete and press ENTER. The following message will appear:

Delete bank 10 ?

31