SVP 450 PLUS - SVD 500 PLUS
Use the arrow 
or 
to change horizontal linearity. Use the arrow 
or 
to change vertical linearity. Press ENTER or EXIT to change function.
Press ESC to exit.
5.12.5 Deflection pincushion top
This funtion allows to change top and horizontal pincushion.
5.12.3 Deflection dimensions
This function allows to change the dimensions of the raster.
- PICTURE -
DEFL SIZE
H. = 100 | V. = 100 |
Use the arrow to change the value.
Press ENTER or EXIT to change function. Press ESC to exit.
The raster dimension is strictly connected to the video projector resolution. The smaller the raster, the lower the resolution.
DEFL PIN TOP
H. = 50 | V. = 50 |
Use the arrow 
or 
so that the top horizontal lines are straight.
Use the arrow 
or 
so that the vertical image borders are straight.
Press ENTER or EXIT to change function. Press ESC to exit.
5.12.6 Deflection pincushion bottom
This funtion allows to change bottom and horizontal pincushion.
DEFL PIN BOT.
H. = 50 |
| V. = 50 |
5.12.4 Keystone correction
This function allows to modify the vertical keystone. Use the arrow 
or 
to change the vertical keystone setup.
DEFL KEY
H. = 50
Press ENTER or EXIT to change function. Press ESC to exit.
Use the arrow 
so that the bottom horizontal lines are straight.
Use the arrow 
so that the vertical image borders are straight.
Press ENTER o EXIT to change function. Press ESC to exit.
Note: It could be necessary to repeat the regulation loop more than once. If the projector is well positioned, it will only be necessary few small adjustments.
5.13 Convergence
It is necessary to modify the green CRT convergence only for the multiprojection.
After having changed the green deflection; you must try to obtainb the best superimposion of the red snd the blue on the green.
34
