SVP 450 PLUS - SVD 500 PLUS
5.7 White balance
To select one of the set colour temperatures (3200°K,6500°K, 9300°K, USER BANK) for the projected images.
To select one of the colour temperatures, proceed as
follows: press the button 
for a few seconds, the following menu will appear:
WHITE BALANCE
3200KADJ.
6200KADJ.
9300KADJ.
USERADJ.
FACTORY SET
VIDEO MENU
NOISE RED
STD SELECTION BLANKING WHITE BALANCE UPC MENU
TLV SYNC
FACTORY SET: if you select this item, the system will utilize the preset manufacturer regulations.
Use the arrow
to select a colour temperature to change and press ENTER to confirm, the following menu will appear:
3200K ADJ
Use the arrow 
or 
to select WHITE BALANCE and press ENTER to confirm, the following menu will appear.
WHITE BALANCE
SET TO 3200K
SET TO 6500K
SET TO 9300K
SET TO USER
The arrow on the left of the window indicates the current setup.
Use the arrow 
or 
to select a setting and press ENTER to confirm.
The SET TO USER is an optional setup.
This adjustment must be carried out by a qualified technician.
To change the colour temperature settings, you must enter in the installation mode.
Press the button VID.S, the following menu will appear:
VIDEO SETUP
Y/C DELAY
WHITE BALANCE
COMB. FILTER
GAMMA ADJ.
ADAPTIVE BLACK
BLUE STRETCH
Use the arrow 
or 
to select the WHITE BALANCE adjustment and press ENTER to confirm, the following menu will appear:
R G B
BLACK XX XX XX
WHITE XX XX XX
Press R, G, B, to select the BLACK R, BLACK G or BLACK B item.
Press Rsel, Gsel, Bsel, to select WHITE R, WHITE G or WHITE B item. The selected item willbe highlighted. Use the arrow 
or 
to change the value.
Upon pressing the EXIT button to return to the video menu, the software wil ask you to store the new values with this message:
STORE DATA ?
STORED
Press ENTER to confirm or EXIT to exit.
After having ended this procedure, the selected new colour temperature value willbe indicated by the arrow on the left of the window.
5.8 Memory manager
With this menu you can select, copy, move or delete a memory bank containing all the projector adjustments or to store new ones.
Each memory bank is described by:
1.a number
2.a name or label
3.an aspect ratio flag
4.a horizontal frequency
5.a vertical frequency.
28
