Sim2 Multimedia SVP 450 PLUS manual How to insert a label, How to change an aspect ratio flag

The name is a mnemonic label and it is written by the user. The aspect ratio flag indicates which aspect ratio has been stored by the user during the regulations setup. It is very important for the user to store the correct aspect ratio flag.

The horizontal and vertical frequencies ar measurd by the projector and stored inthe relevant memory bank each time you save a regulation setup. When the projector is switched on, the software automatically loads the last memory bank selected.

5.8.1 How to enter the memory manager

Press OPT, the following menu will appear:

OPTIONS MENU

OSD

INSTALL. TYPE

POWER ON

VCR STABILITY

MEMORY MANAGER

WORKING TIME

Use the arrow or to select MEMORY MANAGER and press ENTER to confirm, the following menu will appear:

WORK		MEMORY MANAGER
08	BN	NAME		F	HOR	VER
LOAD	01	Pal Upc		N	31.2	50
COPY	02	. . . . .		-	--.-	---
	03	Pup 16/9		W	31.2	50
	04	Nstc		N	15.7	60
MOVE	05	NstcUpc		N	31.4	60
	06	Vga	2	N	35.1	56
DEL	07	Vga	3	N	37.6	68

Load bank

WORK 01: It indicates that bank 01 has been recalled. It is important when the input frequencies do not match those stored in the bank.

BN: Bank number.

NAME: Mnemonic bank name ( Label )

F:Flag. With this function you can change the aspect ratio: Small, Normal, Wide, Cinema, Large.

HOR: Horizontal frequency. It is measured by the software and stored in the memory bank.

VER: Vertical frequency. It is measured by the software and stored in the memory bank.

5.8.2 How to insert a label

First of all, you must enter the memory manager.

Press the right arrow and use the up or down arrows to select in which memory bank you want to change the label.

SVP 450 PLUS - SVD 500 PLUS

Press ENTER, the following menu will appear:

WORK		MEMORY MANAGER
08	BN	NAME		F	HOR	VER
LOAD	01	Pal Upc		N	31.2	50	H
	02	. . . . .		-	--.-	---
COPY							SI
	03	Pup 16/9		W	31.2	50
	04	Nstc		N	15.7	60	L
							G
MOVE	05	NstcUpc		N	31.4	60
	06	Vga	2	N	35.1	56	N
DEL	07	Vga	3	N	37.6	68	E
Modify bank name

Use the arrow or to scroll the alphabet and the arrow or to skip at the next letter. After having written the correct label, press ENTER to confirm.

Data saved

5.8.3How to change an aspect ratio flag

First of all, you must enter the memory manager.

Press the right arrow twice. Select in which memory bank you wish to change the aspect ratio. Press ENTER, the following menu will appear:

WORK		MEMORY MANAGER
08	BN	NAME		F	HOR	VER
LOAD	01	Pal Upc		N	31.2	50
COPY	02	. . . . .		-	--.-	---
	03	Pup 16/9		W	31.2	50
	04	Nstc		N	15.7	60
MOVE	05	NstcUpc		N	31.4	60
	06	Vga	2	N	35.1	56
DEL	07	Vga	3	N	37.6	68

Modify bank aspect ratio

Use the arrow or to select the desired ratio between:

Small, Letter Box, Cinema, Wide, Normal.

Press ENTER to confirm and the following message will appear:

Data saved

5.8.4 Horizontal and vertical frequencies

The horizontal and vertical frequencies are measured by the projector and stored in the relative memory bank each time you store a change.

If the input signal does not match the frequency stored in the memory bank the software will automatically recall the memory bank with the frequency nearest to that of the input signal, in this order: horizontal frequency, vertical frequency, aspect ratio.

If the frequencies of the input signal are different from those stored in the memory bank, the software will not recognise the frequency and, if you store settings, it will ask to create a new memory bank.

29