24571.1 en.qxd 31-08-2005 11:59 Pagina 3

Safety warnings

Do not insert the power plug in a wall socket before all connections are made.

&Wall mounting instructions/Table stand

According to the type of TV you’ve purchased a wall mount bracket and/or stand may be supplied. How to mount the supplied stand and/or wall mount bracket, see the supplied separate leaflet. Make sure that the

wall mount is being fixed securely enough so that it meets safety standards.

The weight of the TV (excl. packaging) is about 20 kg (32PF9967D); 42 kg (42PF9967D); 58 kg (50PF9967D).

é Place or hang the TV wherever you want, but make sure that air can circulate freely through the ventilation slots. Do not install the TV in a confined space such as a book case or a similar unit.

To prevent any unsafe situations, no naked flame sources, such as lighted candles, should be placed in the vicinity. Avoid heat, direct sunlight and exposure to rain or water.

The equipment shall not be exposed to dripping or splashing.

English

Connect antenna and peripheral equipment

&Before installing your TV, connect all your peripheral equipment.

See How to connect peripheral equipment, p. 29.

 

é Insert the aerial plug firmly into the aerial socket x at the bottom of

 

the TV. For best picture quality use the suppressor-aerial cable

 

supplied.

 

Insert the mains cord supplied into the mains at the bottom of the TV

 

and in the wall socket having a mains voltage of 198-264V.

UK - EIRE

To prevent damaging the power (AC) cord which could cause a fire or

 

electric shock, do not place the TV on the cord.

Remote control

Insert the two R6-type batteries (supplied) making sure that they are the right way round.

The batteries supplied do not contain the heavy metals mercury and cadmium. Please check on how to dispose of exhausted batteries according to local regulations.

Switch the TV on

 

 

 

 

Press the power switch B at the right side of the TV.

 

 

 

 

An indicator on the front of the TV lights up and the screen comes on.

 

 

 

 

If the TV is in standby mode, press the -P+keys or the B key on the

 

 

 

 

remote control.

 

 

 

 

The first time (and only the first time !) the TV is switched on, a

 

 

 

 

congratulation message will appear on screen. Follow the instructions

V

MENU

P/CH

B

on screen or go to p. 7, Switch on for the first time.

3

Page 3
Image 3
Philips 42PF9967D/10 Safety warnings, Connect antenna and peripheral equipment, Remote control, Switch the TV on