Sanyo SAP-KRV93EH, SAP-KRV123EH Remote Control Unit Installation Position, Mounting on a Wall

Models: SAP-CRV93EH SAP-CRV123EH SAP-KRV93EH SAP-KRV123EH

1 77
Download 77 pages 63.4 Kb
Page 29
Image 29
7-3. Remote Control Unit Installation Position

7-3. Remote Control Unit Installation Position

The remote control unit can be operated from either a non-fixed position or a wall-mounted position.

To ensure that the air conditioner operates correctly, do not install the remote control unit in the following places:

In direct sunlight

Behind a curtain or other place where it is covered

More than 8 m away from the air conditioner

In the path of the air conditioner’s airstream

Where it may become extremely hot or cold

Where it may be subject to electrical or magnetic interference

Where there is an obstacle between the remote control unit and the air conditioner (since a check signal is sent from the remote control unit every 5 minutes)

7-3-1. Mounting on a Wall

Before mounting the remote control unit, press the ON/OFF operation button at the mounting location to make sure that the air conditioner oper- ates from that location. The indoor unit should make a beeping sound to indicate that it has received the signal.

Remote control unit mount

Press

Mounting screws 4 16 (included)

Set in place

Rear side

Hole

To prevent loss of the remote control unit, you can connect the remote control unit to the mount by passing a string through the remote control unit and attachment hole.

To take out the remote control unit, pull it forward.

Fig. 7

29

Page 29
Image 29
Sanyo SAP-KRV93EH, SAP-KRV123EH, SAP-CRV123EH, SAP-CRV93EH Remote Control Unit Installation Position, Mounting on a Wall