SECTION 7—SEAT
Seat Base | Mounting Screws |
|
Mounting Holes | Back |
| |
| Assembly |
MOUNTING POSITIONS
Mounting |
Screws |
Back Assembly |
Seat Base |
Mounting |
Screws |
Back Assembly |
Seat Base |
Mounting Screws |
Back Assembly |
Seat Base |
FIGURE 7.3 - ADJUSTING SEAT DEPTH
4.Adjust back assembly to one (1) of three (3) mounting positions (FIGURE 7.3).
5.Reinstall the six (6) mounting screws securing the back assembly to the seat base. Securely tighten.
6.Reinstall the adjustable width arms. Refer to Removing/Installing/Adjusting Arms on page 40.
7.Reinstall the seat assembly onto the scooter. Refer to Removing/Installing the Seat on page 34.
90° SEAT SWIVEL ADJUSTMENT
WARNING
Ensure that seat is locked into the forward position BEFORE and DURING operation of the scooter. Otherwise, injury to the user and/or damage to the scooter may result.
CAUTION
DO NOT use the seat swivel option when accessories are installed (such as safety flag, crutch/cane holder, etc.) and the seat is mounted in lowest height adjustment position. Otherwise, damage to the scooter may occur.
NOTE: For this procedure, refer to FIGURE 7.4.
1.The seat lever is located just beneath the seat on the RIGHT side.
2.Pull the seat lever UP to rotate the seat.
Part No. 1118395 | 37 | 300 and 400 |
