Invacare HMV Highly 300, HMV Highly 400 manual Resetting the Circuit Breaker, Brake Release Lever

SECTION 6—OPERATION OF THE POWERED SCOOTER

Controller Tray

Transaxle

NOTE: Brake Release Lever on 300 shown. Brake Release Lever on 400 operates the same way.

ENGAGED

(PUSH LEVER IN)

	DISENGAGED
Brake Release Lever	(PULL LEVER
	OUT)

FIGURE 6.3 - BRAKE RELEASE LEVER

RESETTING THE CIRCUIT BREAKER

WARNING

NEVER defeat or bypass the circuit breaker. ONLY replace with a circuit breaker of the same rating.

NOTE: Key must be removed from ignition before resetting circuit breaker.

NOTE: For this procedure, refer to FIGURE 6.4.

1.Remove seat. Refer to Removing/Installing the Seat on page 34.

2.Remove rear shroud. Refer to Removing/Installing the Rear Shroud on page 44.

3.To reset, press circuit breaker button located on the controller tray.

4.Reverse STEPS 1 and 2 to reassemble the powered scooter.

DETAIL “A” - 300

Circuit

Breaker

Button

Controller Tray

DETAIL “B” - 400

Circuit

Breaker

Button

Controller Tray

FIGURE 6.4 - RESETTING THE CIRCUIT BREAKER

300 and 400 32 Part No. 1118395