SECTION 9—TILLER ADJUSTMENT
SECTION 9—TILLER ADJUSTMENT
ADJUSTING THE TILLER ANGLE
WARNING
Before performing any maintenance, adjustment or service, turn power OFF and remove key from ignition.
Ensure that tiller is properly adjusted before driving the scooter.
After making ANY tiller angle adjustments and BEFORE use, the tiller MUST be securely locked into position. Otherwise, a fall from the scooter could occur causing bodily injury and/or damage to the scooter. Gently, push/pull against tiller to ensure that the tiller is securely engaged into the adjustment plate.
NOTE: For this procedure, refer to FIGURE 9.1.
NOTE: The powered scooters feature an adjustable tiller. The tiller locks into a position that is most comfortable for you. The tiller can also be folded DOWN for transportation and storage.
1.Pull UP on the tiller release lever located under the RIGHT tiller handle.
2.Push/pull the tiller to the desired angle and release the tiller lever.
3.Gently, push/pull against tiller to ensure that the tiller is securely engaged into the locking mechanism.
NOTE: The tiller is locked in position when an audible "click" is heard.
Tiller Release Lever
Tiller
UP to
UNLOCK
RIGHT Tiller Handle
DOWN to
LOCK
NOTE: Tiller on 300 shown. Tiller on 400 adjusts the same way.
FIGURE 9.1 - ADJUSTING THE TILLER ANGLE
Part No. 1118395 | 43 | 300 and 400 |
