SECTION 11—WHEELS AND CASTERS

REMOVING/INSTALLING THE CASTER ASSEMBLIES

NOTE: For this procedure, refer to FIGURE 11.3.

REMOVING

1.Apply a wrench to the hex nut on the caster assembly.

2.Turn the hex nut COUNTER-CLOCKWISE to loosen and remove the caster wheel.

3.If necessary, repeat STEPS 1-2 to remove the other caster.

INSTALLING

1.Insert the new caster wheel into the caster housing and turn the hex nut CLOCKWISE to securely tighten the caster wheel in place.

Caster Housing

Hex Nut

Swingarm Assembly

Caster

FIGURE 11.3 - REMOVING/INSTALLING THE CASTER ASSEMBLIES

300 and 400

48

Part No. 1118395

Page 48
Image 48
Invacare HMV Highly 300, HMV Highly 400 manual REMOVING/INSTALLING the Caster Assemblies