SECTION 8—ARMS

SECTION 8—ARMS

WARNING

After ANY adjustments, repair or service and BEFORE use, make sure all attaching hardware is tightened securely - otherwise injury or damage may result.

Before performing any maintenance, adjustment or service, turn power OFF and remove key from ignition.

REMOVING/INSTALLING/ADJUSTING ARMS

NOTE: For this procedure, refer to FIGURE 8.1.

REMOVING/INSTALLING

NOTE: Reverse this procedure to install the arms.

1.Loosen adjustment knob that secures the arm to the arm support bracket.

2.Remove the adjustable width arm from the arm support bracket.

3.If necessary, repeat STEPS 1-2 to remove the remaining arm.

Arm

Arm Mounting Tube

Adjustment Knobs

Arm Support Bracket

 

FIGURE 8.1 - REMOVING/INSTALLING/ADJUSTING ARMS

ADJUSTING ARM WIDTH

NOTE: Changing the width of the arms may also effect the overall width of the powered scooter. Use caution when traveling through doorways as the width may have increased.

1.Loosen the adjustment knob located beneath the seat frame on the arm support bracket. Refer to FIGURE 8.1.

300 and 400

40

Part No. 1118395

Page 40
Image 40
Invacare HMV Highly 300, HMV Highly 400 REMOVING/INSTALLING/ADJUSTING Arms, Removing/Installing, Adjusting ARM Width