76 Installing System Components
Figure 3-15. Removing and Installing the Mezzanine-Card Cover (10 GbE LAN)
Installing the Mezzanine Card (10 GbE LAN)
1
If you are installing a mezzanine card for the first time, remove the
twoscrews securing the mezzanine-card cover and remove the cover.
SeeFigure 3-15.
2
Align the spacer pins on the mezzanine card with the holes on the system
board.
NOTE: The three spacer pins must be inserted through the board for proper
installation of the mezzanine card.
3
Secure the board using the screw. See Figure3-14.
4
Replace the riser card assembly. See "Installing the Expansion-Card Riser"
on page 67.
5
Replace the cooling shroud. See "Installing the Cooling Shroud" on
page55.
6
Replace the system cover. See "Closing the System" on page54.
7
Reconnect the system and peripherals to their electrical outlets, and turn
on the system.
1 back panel 2 mezzanine-card cover
3 screws (2)
1
2
3
book.book Page 76 Friday, December 4, 2009 4:13 PM