78 Installing System Components
Figure 3-16. Removing and Installing the Non-Redundant Power Supply
Installing the Non-Redundant Power Supply
1
Insert the replacement power supply and the securing bracket firmly into
the bay. See Figure3-16.
2
Replace the two screws at the back.
3
Replace the four screws securing the bracket.
4
Replace the cables connecting the power supply to the system board and
backplane. See Figure5-2, Figure 5-4, and Figure 5-6.
5
Replace the system cover. See "Closing the System" on page54.
6
Connect the power cable to the power supply and plug the cable into a
power outlet.
7
Reconnect your system and peripherals to their electrical outlets, and turn
on the system.
1 power supply 2 screws (6)
3bracket
2
3
1
book.book Page 78 Friday, December 4, 2009 4:13 PM