90 Installing System Components
4
Slide the cover away toward the back of the system to remove it.
5
Disconnect the USB and LED signal cables and remove the two securing
screws.
6
Slide the front LED Board toward the front of the system to remove it.
Figure 3-24. Removing the Control Panel Assembly
Installing the Control Panel Assembly1
Slide the front LED Board toward the front of the system and secure in
place with the eight screw on the front and sides of the system cover.
2
Connect the USB and LED signal cables and secure in place with
the two screws.
3
Replace the cooling shroud. See "Installing the Cooling Shroud" on
page55.
4
Replace the system cover. See "Closing the System" on page54.
5
Reconnect the system and peripherals to their electrical outlets,
and turn on the system.
1 screws (2) 2 USB cable
3 LED signal cable 4 front LED board
4
3
12
book.book Page 90 Friday, December 4, 2009 4:13 PM