88 Installing System Components
Installing the Backplane
1
Insert the backplane in the direction of the arrow until it is seated in the
system.
2
Replace all the hard drives in the system. See "Installing a Hard-Drive
Carrier" on page 52.
3
Replace the cooling fan assembly and secure with the two screws.
4
Connect all cooling fan power cables.
5
Connect the SATA cables, the IPMB cable, and a single power cable.
SeeFigure 5-4.
6
Replace the cooling shroud. See "Installing the Cooling Shroud" on
page55.
7
Replace the system cover. See "Closing the System" on page54.
8
Reconnect the system and peripherals to their electrical outlets,
and turn on the system.
Control Panel (Optional)Removing the Control Panel
CAUTION: Many repairs may only be done by a certified service technician.
Youshould only perform troubleshooting and simple repairs as authorized in
yourproduct documentation, or as directed by the online or telephone service
andsupport team. Damage due to servicing that is not authorized by Dell is not
covered by your warranty. Read and follow the safety instructions that came
withthe product.
1
Turn off the system, including any attached peripherals, and disconnect
the system from the electrical outlet.
2
Remove the single securing screw from the side of the chassis.
SeeFigure 3-23.
3
Pull the control panel out of the chassis. See Figure3-23.
book.book Page 88 Friday, December 4, 2009 4:13 PM