Installing System Components 81
Figure 3-18. Removing and Installing the Power Distribution Board
Installing the Power Distribution Board
1
Place the power distribution board on the system and secure it with the
four screws. See Figure3-18.
2
Connect the cables to the power distribution board. See Figure5-7.
3
Connect the power distribution cables to the system board. See "System
Board" on page93.
4
Install the expansion card riser. See "Installing the Expansion-Card Riser"
on page67.
5
Install the power supplies to the system. See "Installing the Redundant
Power Supply" on page80.
6
Install the cooling shroud. See "Installing the Cooling Shroud" on page55.
7
Replace the system cover. See "Closing the System" on page54.
8
Reconnect the system and peripherals to their electrical outlets, and turn
on the system.
1 fan module cable connector 2 power distribution board
3screws (4)
3
2
1
book.book Page 81 Friday, December 4, 2009 4:13 PM