Installing System Components 71
3
With the cable oriented toward the back, angle the left side of the RAID
battery into the left side of the battery bay.
4
Rotate the right side of the RAID battery down and press into the
lockedposition.
5
Connect the RAID battery cable to the RAID battery connector on the
storage controller. See Figure3-12.
6
Close the system. See "Closing the System" on page54.
7
Reconnect your system and peripherals to their electrical outlets, and turn
on the system.
Figure 3-12. Removing or Installing a RAID Battery
1 screws (2) 2 RAID battery bay
3 RAID battery
2
3
1
book.book Page 71 Friday, December 4, 2009 4:13 PM