38 Using the System Setup Program
Memory ConfigurationIDE Configuration
Option Description
Current Memory
Frequency (1066MHz
default)
Displays the current memory frequency
Memory Turbo Mode
(Disabled default)
Displays the memory turbo mode.
Memory Frequency
(Autodefault)
Forces a DDR3 frequency slower than the common tck
detected via SPD.
Memory Mode
(Independent default)
Selects the memory mode.
Throttling - Closed Loop
(Enabled default)
Enables BIOS to program Closed Loop throttling for
memory components.
Throttling - Open Loop
(Enabled default)
Enables BIOS to program Open Loop throttling for
memory components.
Option Description
SATA#1 Configuration
(Enhanced default)
Configures the SATA#1.
Configure SATA as
(IDEdefault)
Configures the SATA.
•IDE
•AHCI
•RAID
Hard Disk Write Protect
(Disabled default)
Enables or disables device write protection. This is
effective only if the device is accessed through BIOS.
IDE Detect Time Out
(Sec)
Selects the time out value for detecting ATA/ATAPI
device(s).
book.book Page 38 Friday, December 4, 2009 4:13 PM