94 Installing System Components
Figure 3-26. Removing and Installing the System Board
Installing the System Board
1
Align the holes A and B on the system board to position the board correctly
in the system.
2
Replace the ten screws to secure the system board in place.
3
Reconnect the power, IPMB, SATA, front panel, and system board
connectors to the system board. See "System Board Connectors" on
page111.
4
Replace the processors. See "Installing the Processor" on page59.
5
Replace the heat sinks. See "" on page57.
6
Replace the expansion-card riser. See "Installing the Expansion-Card Riser"
on page 67.
7
Replace the memory modules. See "Installing Memory Modules" on
page65.
8
Replace the cooling shroud. See "Installing the Cooling Shroud" on
page55.
9
Replace the system cover. See "Closing the System" on page54.
10
Reconnect the system and peripherals to their electrical outlets, and turn
on the system.
1 screws (10) 2 system board assembly
1
2
book.book Page 94 Friday, December 4, 2009 4:13 PM